Category results for : Tip & Tricks

This story was originally published by HAMISH CHAMP on the Bluebeam Blog. With the built environment such a prominent source of carbon emissions, it is vital that the industry recognizes the urgent need to ‘climate ... https://www.solidcad.ca/residential-climate-proofing/ HIVE Revit Family Standards

What are HIVE Revit Family Standards? HIVE Standards is a system that helps BIM managers check and maintain the quality of Revit family content for the organization. It is set up in the HIVE Portal and runs automatic ... https://www.solidcad.ca/hive-revit-family-standards/ Reimagining Home with Regenerative AI Tools

This story was originally published by Diana Kightlinger on the Bluebeam Blog. To create a more desirable future, how should homes, neighborhoods and cities evolve? The SPACE10 Research and Design Lab launched ... https://www.solidcad.ca/ai-tools/ Autodesk Software Downloads

History has indicated that when downloading Autodesk software, one must also manually choose to download and install the appropriate updates for said software. This is often a point of contention as it’s an ... https://www.solidcad.ca/autodesk-software-downloads/ How Drone Technology Is Construction’s Eye in the Sky

This story was originally published by HAMISH CHAMP on the Bluebeam Blog. Drones – also known as unmanned aerial vehicles, or UAVs – vary in size and operability. Some are single-rotor machines, akin to a ... https://www.solidcad.ca/how-drone-technology-is-constructions-eye-in-the-sky/ Bluebeam Studio Sessions vs. Projects: When to Use One, the Other or Both

Illustration by Jonny Ruzzo This story was originally published by FRANK KALMAN on the Bluebeam Blog. Bluebeam’s tool for real-time collaboration, Bluebeam Studio Sessions, and its tool for document storage, ... https://www.solidcad.ca/bluebeam-studio-sessions-vs-projects-when-to-use-one-the-other-or-both/ Navigating the Markups List in Bluebeam

This story was originally published by CHRIS GRAHAM on the Bluebeam Blog. If you’ve ever seen a document full of cluttered markups, you’ve thought, “How am I supposed to work with this?” Whether it’s ... https://www.solidcad.ca/navigating-the-markups-list-in-bluebeam/ Flow and Pressure Drop Calculations Available in MEP Fabrication Elements

Have you noticed in Revit you have to choose between ducting and piping that supports flow propagation OR ductwork that is modelled for the intent of fabrication? In the 2024 release of Revit, Autodesk has made ... https://www.solidcad.ca/flow-and-pressure-drop-calculations-available-in-mep-fabrication-elements/ Land Development Quantities in Bluebeam

This story was originally published by TROY DEGROOT on the Bluebeam Blog. By now you’ve read several of my articles showcasing various disciplines within the design and construction industry and how I’ve ... https://www.solidcad.ca/land-development-quantities-in-bluebeam/ How Technology Can Help Construction Amid Economic Uncertainty

This story was originally published by JAMES CHAMBERS on the Bluebeam Blog. Technology has the potential to eliminate redundant work and streamline mundane-yet-critical tasks, easing the burden on construction ... https://www.solidcad.ca/how-technology-can-help-construction-amid-economic-uncertainty/