• AutoCAD Printing and CTB

    Matt Kolberg
    Technical Consultant — INFRA/GIS at SolidCAD  

    Do you use more than one CTB file when printing in AutoCAD?  More than 10?  40?  What if I said you really only need 1, the Monchrome.ctb file?  Read on to find out how…

    If you already understand CTB files, feel free to scroll down to the heading “Do This Instead”.

    Let’s look at what we have to work with:

    1.AutoCAD users use various colours.

    2.Typically, the colours used are chosen from this 256-colour “Index” palette.

    3.Those colours on the screen don’t always print that colour.

    4.Linework need to print to varying widths.



    CTB files are the intermediary between the drawing on screen and the final printed product.  If one is not used, what you see on screen is what is in the print.  They are used to transform what is seen on screen to what is displayed in the print.


    Many AutoCAD users rely on several CTB files to print documents to various regulatory standards.  Here is why…

    • The City of SolidCAD requires a sanitary sewer layer to be red on screen but print black and thick (1mm).
    • The District of Cansel requires that same sanitary layer to be red on screen but print red and not so thick (0.7mm).
    • 42 other standards exist and a unique CTB file is required for each of them.

    Here is the SolidCAD CTB file:

    Here is the Cansel CTB file:



    Yes, that was a little tongue-in-cheek.  Sometimes you’re sent a file and you just need to print and use the available CTB.  But if you have the time, inclination, and desire to make things a little easier on yourself, understand it’s possible.


    Do This Instead

    The solution here is actually very simple.  Follow these steps.

    1.Set the line weight properly for the layer based on the regulatory body standard.

    2.Use the out of the box monochrome.ctb file.  This file prints all 256 Index colours in black.

    How to print hat sanitary layer in red when the CTB file prints all colours black, you ask?  Well, I didn’t say the CTB prints all colours black, just the 256 Index colours.

    3.When colour is required set the layer colour, not to one of the 256 Index colours, but to one of the 16.7 million True Colours.

    4.You need to print a grey shade?  Again, choose a True Colour; just choose a colour at the very bottom.  Use the slider on the right to control the shade.

    You see, the CTB file does not control the output of True Colours, only the 256 Index colours.