February 6, 2020
Interested in tweaking an HSM (Inventor CAM, Fusion CAM, HSMWorks) post-processor yourself?
The “SolidCAD Universal FANUC” post processor (free on our website) contains a large number of parameters that can be set on-the-fly through the “Post-Process” dialog, without needing to change anything inside the post-processor.
If you require other changes, SolidCAD offers a post-processor modification service to adapt this post to your machine and to your best practices. If you wish to make changes yourself, you are free to do so. Indeed, the “SolidCAD Universal FANUC” post-processor and all the post-processors available on the HSM Post Library website are unlocked and open-source.
The HSM Post Library is found here: https://cam.autodesk.com/hsmposts
If you can’t find an answer in this 200-page guide, you can consult the vast archive of the HSM Post-Processor Forum, and even post your question on this very active forum. The forum is located here: https://forums.autodesk.com/t5/hsm-post-processor-forum/bd-p/218
Autodesk Fusion 360 & Metallic Strip Animal Sculptures – Part 2
As promised in my last blog, here are some tips and tricks that I often use to convert mesh body to a b-rep or t-spline body in Fusion 360. Tip #1: Converting a mesh body to a b-rep or t-spline body in Fusion ...
The Digital Transformation Train is Leaving the Station, and We Should All Be on Board
2020 has taught me a number of things, including presumably how indoor cats feel, that March and June are the same thing if you don’t go outside, and that if Godzilla were to stumble onto the shores of Tokyo ...
Autodesk Fusion 360 & Metallic Strip Animal Sculptures – Part 1
Part 1 I love sculptures and can spend hours at museums that devoted to sculpture. I also love structural Engineering and structural sculptures. Running into Artist Sung Hoon Kang‘s stunning animal sculptures ...